Questions? 1-888-481-3375

This job is no longer available, but here are some other jobs:

Quality Inspector

San Diego CA

Base Pay: DOE

RemX Engineering is hiring experienced Quality Inspectors to join a busy medical device manufacturer based out of the Sorrento Valley are...

RemX Engineering is hiring experienced Quality Inspectors to join a busy medical device manufacturer based out of the Sorrento Valley area in San Diego. This is a temp to hire position offering long-term career potential for the successful candidate.

Schedule:  Mon-Fri, 12pm-8:30pm OR 2pm-10:30pm, with occasional overtime as needed

Primary Responsibilities:

  • Perform receiving, in-process and final inspections to ensure products meet established conformance
  • Generate Non-Conforming Materials Report (NCMR) when necessary and conduct proper containment
  • Conduct First Article Inspections (FAI) of materials that are associated with qualification / validation

Apply Now More Info

Electrical Engineer

South San Francisco CA

Base Pay: DOE

RemX Engineering is offering a new opportunity for an Electrical Engineer with a strong background in firmware development to join a new,...

RemX Engineering is offering a new opportunity for an Electrical Engineer with a strong background in firmware development to join a new, innovative developer of wearable and implantable medical devices. This is a direct hire, permanent position with long-term career potential for the successful applicant. The products contain a complex mix of microcontrollers, LEDs, sensors, digitizers, Bluetooth connectivity, and batteries. 

Primary Responsibilities:

  • Develop breadboard systems and associated firmware/software for testing feasibility of optical detection concepts
  • Design control circuits, develop schematics, and perform board layout
  • Develop appropriate firmware and software for feasibility testing and final design
  • Test electrical functionality of devices
  • Perform product verification and validation testing and documentation
  • Work collaboratively and cross-functionally with other engineering teams including optical engineering, mechanical engineering, algorithm development, software development and pre-clinical teams in the development of complex electronic medical devices

Apply Now More Info

Civil Engineer

Mojave CA

Base Pay: Competitive Pay Rate Based on Experience

RemX Engineering is currently seeking a Civil Engineer to support capital improvement projects for a cutting-edge aerospace developer bas...

RemX Engineering is currently seeking a Civil Engineer to support capital improvement projects for a cutting-edge aerospace developer based in Mojave, CA. The Civil Engineer will work closely with the Facilities Engineering team creating drawings and plans for modifications to existing structures, but may also support design and estimation for new-build projects as needed.

 

This is a contract opportunity expected to last approximately one year but may have the opportunity for long-term employment based on personal performance and business needs.  Competitive hourly pay offered based on experience.

 

Primary Responsibilities:

  • Reviews and designs engineering projects in compliance with federal, state and local legal requirements
  • Creates 2D drawings and 3D models of engineering projects related to modifications on existing structures or new buildings
  • Coordinates and oversees the preparation of project design submittals for permitting
  • Determines project costs by calculating labor, material and related costs
  • Works across functions with management, engineering, and other teams regarding manufacturing capabilities, production schedules, and other considerations to facilitate project completion

Apply Now More Info

Mechanism Design Engineer

Mojave CA

Base Pay: DOE

RemX Engineering has a few great opportunities for Mechanism Design Engineers for direct hire and contract positions...

RemX Engineering has a few great opportunities for Mechanism Design Engineers for direct hire and contract positions based out of Mojave, CA. The Mechanisms Design Engineers will work on the design, performance, manufacturing, and installation of complex interior mechanism designs on innovative aircraft platforms. Experience in developing and verifying manned space systems for extreme environments is strongly preferred. Ideal candidates will have experience in spaceflight mechanism development with an emphasis on two-fault tolerant mechanical systems.

 

Primary Responsibilities:

  • Develop parametric CATIA V5 modes that can be used to refine final mechanical designs
  • Develop and validate design requirements, including creation of integrated verification plans for compliance and certification
  • Support the creation of test plans to verify design intent, requirements and functionality
  • Work directly with prototype and production shop personnel to optimize design concepts
  • Support the review of production planning and procedures to ensure compliance with design requirements

Apply Now More Info

Sr. Aerodynamics Engineer

Mojave CA

Base Pay: DOE

RemX Engineering is seeking a senior level Aerodynamicist to join a fast-paced, innovative team working on the cutting edge of commercial...

RemX Engineering is seeking a senior level Aerodynamicist to join a fast-paced, innovative team working on the cutting edge of commercial spaceflight technology. To qualify for this position, the Sr. Aerodynamics Engineer should have a graduate degree in Aerospace Engineering and at least 8 years’ experience in the file including a strong background in aerodynamics, computational fluid dynamics and thermal analysis. This is a direct hire, permanent position offering competitive salary and benefits, fun and team-oriented working environment, and the chance to work on some of the most exciting spacecraft projects out there!

 

Primary Responsibilities:

  • Ensures regulatory and internal company requirements related to loads are met as support for entry into commercial service
  • Development of loads even simulation models and support validation of handling qualities, stability and control criteria for suborbital space missions
  • Review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support and post-flight analysis
  • Development of standardized analysis and reporting tools
  • Updates models from data collected during vehicle or component testing or from analytical tools
  • Develops and substantiates P&HQ criteria and requirements for prototype aircraft with unconventional configurations
  • Develops and maintains database of Performance and Handling Qualities (P&HQ) for use in analysis of aircraft and spacecraft during all flight phases
  • Works cross-functionally with other engineering groups to ensure the proper design application for Performance and Handling Qualities (P&HQ) requirement 

Apply Now More Info

Systems Design Engineer

Mojave CA

Base Pay: DOE

RemX Engineering is looking to hire an experienced Systems Design Engineer to join a cutting-edge developer of spaceflight technology bas...

RemX Engineering is looking to hire an experienced Systems Design Engineer to join a cutting-edge developer of spaceflight technology based out of Mojave, CA. The primary role of the Systems Design Engineer will be to coordinate, develop, design and qualify integrated mechanical, pneumatic, and hydraulic systems to enhance and improve spaceship and carrier vehicle systems. The successful candidate will have a broad knowledge of air vehicle systems, systems integration, engineering design, drawing release processes and subsystem/component development. Strong design skills using CATIA V5 is required.  

This is a direct hire, permanent position offering competitive salary and benefits for the successful candidate, as well the chance to work on some of the most exciting spacecraft technology being developed right now!

Apply Now More Info

Quality Inspector

Oceanside CA

Base Pay: DOE

RemX is currently seeking Quality Inspectors with experience working in a manufacturing environment to join a leading producer of specialized conne...

RemX is currently seeking Quality Inspectors with experience working in a manufacturing environment to join a leading producer of specialized connectors for the Aerospace industry. 

 

Primary Responsibilities:

  • Perform testing and inspection of products to ensure compliance with company and customer specifications and requirements
  • Notify Engineering, Manufacturing, or other support teams to any errors on procedures, drawings, bills of materials, and routers
  • Complete all quality documentation accurately and timely

Apply Now More Info

Calibration Technician

Oceanside CA

Base Pay: DOE

RemX Engineering is looking to fill an immediate opening for an experienced Calibration Technician to join a leading producer of specialized connec...

RemX Engineering is looking to fill an immediate opening for an experienced Calibration Technician to join a leading producer of specialized connectors for the Aerospace industry.  Supporting the Quality Control department, the Calibration Technician is primarily responsible for ensuring gages, tools and product components comply with specifications and quality standards.

 

Primary Responsibilities:

  • Maintain calibration schedule and ensure that all inspection equipment is calibrated on time and in good working order
  • Calibrate dimensional gages and other measuring equipment in accordance with ISO 10725
  • Support quality department on 5S, AS9100 and other audits
  • Serve as backup inspector for production quality assurance
  • Maintain gage certifications and calibration records

Apply Now More Info

Lead Quality Inspector

San Diego CA

Base Pay: DOE

RemX is seeking a Lead Quality Inspector with a strong background in medical device manufacturing for a direct hire position based out of San Diego...

RemX is seeking a Lead Quality Inspector with a strong background in medical device manufacturing for a direct hire position based out of San Diego, CA.  The Lead Quality Inspector will be responsible for mechanical and electronic testing of complex electromechanical devices, as well as supporting quality documentation, audits, and continuous improvement initiatives.

 

Primary Responsibilities:

  • Perform incoming, in-process and final inspections for complex electro-mechanical medical devices
  • Perform dimensional and functional inspections to establish conformance to required specifications
  • Generate non-conforming material reports (NCMR) and participate in Material Review Board (MRB) for non-conforming materials
  • Review device history records (DHR) and quality-related documents for accuracy and completeness
  • Support Quality Manager and Quality Engineers in nonconformance investigations, calibration maintenance programs, and other areas as needed

Apply Now More Info

Technical Writer

San Diego CA

Base Pay: 15.00 per HOUR

RemX is hiring entry-level Mechanical Engineers in Technical Writer roles, joining a global leader in the production of freight vehicles and contai...

RemX is hiring entry-level Mechanical Engineers in Technical Writer roles, joining a global leader in the production of freight vehicles and containers for the transportation industry.  This role supports the aftermarket parts department and will be responsible for the creation and maintenance of parts manuals including technical illustrations and descriptions and other engineering documents. 

 

Primary Responsibilities:

  • Analyze engineering drawings and create descriptions of roles and functions of various components
  • Refine and simplify engineering documents for publication
  • Compile similar parts and assemblies to reduce the total number of parts for ordering and stocking
  • Maintain documents archive for future editing or modification of parts

 

 

 

Apply Now More Info