Congratulations to RemX associate, Shaya Medina, who was named National Staffing Employee of the Year by the American Staffing Association. "This experience has taught me that anything is possible if you put your mind to it...as they say, the sky is the limit!" Click here to read more.

close

Questions? 1-888-481-3375

This job is no longer available, but here are some other jobs:

Senior Electronics Technician

San Diego CA

Base Pay: 25.00 per HOUR

RemX is in need of candidates for a long term contract role for a Senior Electronic Technician in San Diego (Rancho Bernardo) for a client speciali...

RemX is in need of candidates for a long term contract role for a Senior Electronic Technician in San Diego (Rancho Bernardo) for a client specializing in developing and manufacturing medical devices.

Apply Now More Info

Service Technician

San Diego CA

Base Pay: 20.00 per HOUR

RemX is in need of a Service Technician for a temp to permanent position in San Diego.  This Technician will perform mechanical and electrical...

RemX is in need of a Service Technician for a temp to permanent position in San Diego.  This Technician will perform mechanical and electrical repair, maintenance by way of testing and troubleshooting to determine root cause failure of the product.  

Apply Now More Info

Project Engineer

San Diego CA

Base Pay: 0.00 per YEAR

RemX Engineering is in need of a Project Engineer for our client who is an electronics manufacturer located in sunny San Diego. 

RemX Engineering is in need of a Project Engineer for our client who is an electronics manufacturer located in sunny San Diego. 

Apply Now More Info

RF Design Engineer

San Diego CA

Base Pay: 0.00 per YEAR

The RF/Analog Design Engineer will be responsible for development of and will contribute to the commercialization of a new class of proce...

The RF/Analog Design Engineer will be responsible for development of and will contribute to the commercialization of a new class of processing technology for advanced microwave/photonics system. This Engineer will need to contribute to overall system specifications including design, acquire, and test custom boards for hybrid photonic/electronic signal processing systems.   Work with suppliers and manufacturers to design for manufacturability and take company product to production.

Apply Now More Info

FPGA Design Engineer

San Diego CA

Base Pay: 0.00 per YEAR

The FPGA Design Engineer will be responsible for development and will contribute to commercialization of a new class of processing techno...

The FPGA Design Engineer will be responsible for development and will contribute to commercialization of a new class of processing technology for advanced microwave/photonics systems. This Engineer will contribute to the overall system specifications, and is responsible for developing unit, module, and/or FPGA level requirements derived from system level requirements, developing associated architectures, implementing design, performing analysis and testing of the FPGA, module, and/or unit in a laboratory setting.  This Engineer will work in the product development team environment.

Apply Now More Info

Manufacturing Engineer

Rosemead CA

Base Pay: 0.00 per YEAR

RemX Specialty Staffing is search of candidates for a permanent opportunity as a Manufacturing Engineer for a client in the Los Angeles a...

RemX Specialty Staffing is search of candidates for a permanent opportunity as a Manufacturing Engineer for a client in the Los Angeles area.  This role is responsible for identifying opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts. 

Apply Now More Info

Calibration Technician Analyst

Oceanside CA

Base Pay: DOE

RemX is in need of a Calibration Technician Analyst a top manufacturing company in Vista / North County San Diego.   Salary is DOE!   Dut...

RemX is in need of a Calibration Technician Analyst a top manufacturing company in Vista / North County San Diego.

 

Salary is DOE!

 

Duties:

  • Perform calibrations on various calibration equipment, gages, and tools
  • Oversee and maintain calibration records and gage certificates
  • Monitor and maintain the calibration schedule to ensure that equipment and tools have been calibrated on a timely manner
  • Be a resource for the QA Inspectors
  • Perform various audits: AS9100, 5S, etc

Apply Now More Info

CAD Drafter

Oceanside CA

Base Pay: 25.00 per HOUR

RemX Specialty Staffing is seeking a CAD Designer/Drafter for temp to perm position with our client in North County San Diego.  This candidate...

RemX Specialty Staffing is seeking a CAD Designer/Drafter for temp to perm position with our client in North County San Diego.  This candidate will be responsible for updating product drawings, executing engineering change requests, and uploading revised prints onto drawing repository. 

Apply Now More Info

CNC Mill Machinist (Direct Hire)

San Diego CA

Base Pay: DOE

RemX is looking to hire a CNC Mill Machinist for a top manufacturing company in San Diego / Miramar.  This is a DIRECT HIRE position with the...

RemX is looking to hire a CNC Mill Machinist for a top manufacturing company in San Diego / Miramar.  This is a DIRECT HIRE position with the company!  Salary is DOE.

Duties:

  • Will sets up and operate 3, 4, and 5 axis CNC Mills and Routers
  • Tool changes and off sets
  • Blueprint reading and use of measuring tools
  • Will use G&M codes and edit programs as needed
  • Machinist will engage with the Supervisor and CNC Programmer to resolve issues

Apply Now More Info

CNC Programmer

Sylmar CA

Base Pay: Depends on Experience

RemX is in need of a CNC Programmer for a DIRECT HIRE position with a top manufacturing company in Sylmar CA.    SALARY IS DEPENDENT...

RemX is in need of a CNC Programmer for a DIRECT HIRE position with a top manufacturing company in Sylmar CA.  

 SALARY IS DEPENDENT ON EXPERIENCE. 

 Responsibilities:

  • Program multi axis Mills, Lathes, and Mil Turn machines with the use of CAD/CAM software
  • Develop fixturing and tooling needs for new and existing projects
  • Writes on modifies existing programs in Mastercam software
  • Set up multi axis machines
  • G&M codes and edit programs as needed
  • Blue print reading
  • Build and design fixtures and jigs as required

Apply Now More Info

Mold and Tooling Technician

San Diego CA

Base Pay: 20.00 per HOUR

RemX is in need of candidates for a long term contract role for a Mold and Tooling Technician in San Diego for a client specializing in the manufac...

RemX is in need of candidates for a long term contract role for a Mold and Tooling Technician in San Diego for a client specializing in the manufacturing of electrical and optical interconnection systems.

Apply Now More Info

Repair Technician

Poway CA

Base Pay: 20.00 per HOUR

RemX is in need of a Repair Technician for a temp to hire position for a client in Poway.  This Technician will have limited supervi...

RemX is in need of a Repair Technician for a temp to hire position for a client in Poway.  This Technician will have limited supervision, performing aftermarket mechanical and electrical repair of assorted components and instruments by way of testing and troubleshooting to determine root cause failure of product.  

Apply Now More Info

Senior Mold Maker

Vista CA

Base Pay: DOE

RemX is in need of a Senior Mold Maker for a direct hire position with a top manufacturing company in North County San Diego. Salary is Dependent o...

RemX is in need of a Senior Mold Maker for a direct hire position with a top manufacturing company in North County San Diego.

Salary is Dependent on Experience!

Responsibilities:

  • Build and help design plastic injection molds.
  • Program machines using CAM software.
  • Design and Manufacture jigs and fixtures as determined by engineering, quality or production along with electrodes for vertical EDM machines.
  • Conduct repairs, modifications and improvements to molds as required.
  • Ability to operate and set up CNC Mills, Lathes, Surface Grinders, and EDM Sinker machines. 
  • Engage and participate in fabrication and design of mold for new products. 

Apply Now More Info

Systems Test Technician

Poway CA

Base Pay: 20.00 per HOUR

RemX is in need of a Systems Test Technician for a temp to hire position for a client in San Diego.  This Technician sets up standar...

RemX is in need of a Systems Test Technician for a temp to hire position for a client in San Diego.  This Technician sets up standard test apparatus or devises test equipment and circuitry to conduct functional, operational, environmental, and life tests to evaluate performance and reliability of prototype or production model PCA's and complete units.  Writes basic technical reports to describe and illustrate system's operating characteristics, malfunctions, or deviations from design specifications.

Apply Now More Info

Validation Engineer

San Diego CA

Base Pay: 0.00 per HOUR

RemX Specialty Staffing is seeking candidates for a long-term contract position as a Validation Engineer for a medical device manufacturer client i...

RemX Specialty Staffing is seeking candidates for a long-term contract position as a Validation Engineer for a medical device manufacturer client in San Diego.

Apply Now More Info